7625 West New York Street
Indianapolis, Indiana 46214-4911 USA
Telephone: (317) 273-6960
Facsimile: (317) 273-6979
Order Desk Telephone: (800) 401-1723
Order Desk Facsimile: (800) 515-9254
E-mail: info@floteco2.com

Home Page  

Products Page

 

Pressure Reducer Adjustable Pressure

P-Assy-DC-R07-DF-1120(1).jpg (83845 bytes) P-Assy-DC-R07-DF-1120(2).jpg (68256 bytes) P-Assy-DC-R07-DF-1120(3).jpg (89372 bytes)
Assembly DC-R07-DF-1120 shown above is a Nitrogen Pressure Reducer with a non-pressure controlled DISS-1120 Check Valve take off and a DISS-1120 DISS Fitting  that is adjustable from 0 to 200 psi

 

Features

R07

  • Compact design

  • Full flow gauge ports

  • Low torque, non-rising adjusting knob

  • Snap action knob locks pressure setting when pushed in

  • Standard relieving models allow reduction of outlet pressure even when the system is dead-ended

  • Can be disassembled without the use of tools or removal from the air line

 

R07 General Purpose Regulators

All Dimensions in Inches (mm)

Technical Data

Fluid: Compressed air

Maximum pressure: 300 psig (20 bar)

Operating temperature: -34° to 150°F (-35° to 65°C) *

* Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).

Typical flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 15 psig (1 bar) from set:

1/8" ports: 14 scfm (6.5 dm3/s)

1/4" ports: 15 scfm (7 dm3/s)

Gauge ports:

1/8" PTF with PTF main ports

1/8" ISO Rc with ISO Rc main ports

1/8" ISO Rc with ISO G main ports

Materials:

Body: Zinc

Bonnet: Acetal

Valve: Brass/nitrile

Valve seat: Acetal

Elastomers: Nitrile

PORT SIZE: 1/4"

INLET PRESSURE: 150 psig (10 bar g)

RANGE: 5 to 100 psig (0.3 to 7 bar) 

Panel mounting hole diameter 1.19" (30 mm)

Maximum panel thickness 0.25" (6 mm)

Service Kits

Item Type Part number

Service kit

Relieving 3407-02

Non relieving 3407-01

Service kit includes slip ring, diaphragm, standard valve seat with

o-ring, valve, valve spring.