Mass Casualty Manifolds (Multilatorr)

BL100   Multilatorr

      Manifold w/1 each Female DISS-1240 swivel inlet and 5 each DISS-1240 check valve outlets

BL101   Multilatorr

Manifold w/1 Female each DISS-1240 swivel inlet and 5 each DISS-1240 check valve outlets mounted at a 45 degree angle (shown with optional HBD2 Resident Nipple Adapters)

BL300   Multilatorr

Manifold w/1 Female DISS-1240 swivel inlet and 7 DISS-1240 check valve outlets

BL301   Multilatorr

Manifold w/1 each Female DISS-1240 swivel inlet and 7 each DISS-1240 check valve outlets mounted at a 45 degree angle (shown with optional HBD2 Resident Nipple Adapter)  

BL500-F10-320xx Multilatorr 

Manifold w/1 each Female DISS-1240 swivel inlet and 7 each F10-320xx Adjustable Flowmeters permanently mounted.  Two wide Vinyl covered Stainless Steel legs and one Vinyl covered Stainless Steel carrying handle

BML750 Multilatorr Bag

Canvas material w/ double zipper, interior pocket, double handle with interlocking Velcro wrap (shown w/BL500-F10-320xx)  

The Flotec Multilatorr Manifold system is a versatile device used to split a single Oxygen source to multi users for mass casualty events.  The 5 each DISS-1240 check valve outlets of the BL100 series or the 7 each DISS-1240 check valve outlets of the BL300 series are available in straight, 45 degree, or 90 degree outlet angles.  The Multilatorr is attached via an oxygen supply hose to either a male DISS-1240 check valve or a female DISS-1240 swivel inlet options.

The supply hose can be attached to any 20 PSI or 50 PSI source such as a regulator, liquid oxygen source, or the outlet port in the ambulance wall or ceiling.

Any Flotec flowmeter, such as the F00-2C0xx pictured, or Resident Nipple Adapter, such as the HBD2 can be attached to the outlet DISS-1240 check valves to individually control the flow to each of the outlets.

The HBD2 is available in the following flows and colors: